Bar-Ot Systems is the official Israeli dealer for the LABELMATE products.
B.O.S. holds a wide variety of products ranging from label dispencers through slitting systems
to label roll un/winders.

Bar-Ot Systems has expertised the label printing industry for over 10 years and has gained alot
of first hand experience printing labels and using several brands of printing aids and devices,
hence the choice of LABELMATE line of products that have used us in our personal experience
and use on our own mass printing needs with a full satisfactory.

Visit LABELMATE's web page. www.labelmate.com

TO PLACE AN ORDER ON A LABELMATE PRODUCT PLEASE CALL US TO:

Bar-Ot Systems

Tel. +972-9-7660856

FAX. +972-9-7673284

 

LABEL DISPENSERS
 
MODEL
DESCRIPTION
LABEL WIDTH
LABEL LENGTH
ROLL DIA.
LD-100-
RS
Automatically advances the next label ready to pick. Fast label loading. Quick and convenient operation! Not for transparent labels.
Up to 115 mm (4.5”)
6- to 150-mm (0.24” to 5.9”)

220 mm (8,6")

LD-200- RS

Same features as LD-100-RS, but with wider label capacity.
Up to 150 mm (6,5")
12 mm (0.5”) to 150 mm (5.8")
220 mm (8,6")
LD-FLANGES
Optional aluminum Flange Plates suggested for use with narrow labels that may have a tendency to telescope or fall off the core. Set of 2 Flanges for LD-100-RS or LD-200-RS.
N/A
N/A
N/A
C-1
Optional Label Counter for LD-100-RS & LD-200-RS. (Factory installed)
N/A
N/A
N/A
HS-PS
High-speed power supply to increase speed of the dispenser.
N/A
N/A
N/A

 

MODEL
DESCRIPTION
LABEL WIDTH
LABEL LENGTH
ROLL DIA.
LD-100
Automatically advances the next label ready to pick. Fast label loading. Quick and convenient operation! For transparent or opaque labels!
10- to 115-mm (0,4” to 4.5”) max.
12 mm (0.5”) to 150 mm (5.8")
220-mm (8.6”) max.

 
Core I.D. 38- to 76-mm (1.5” to 3”)
LD-200
Same features as LD-100, but with wider label capacity.
10- to165-mm (0,4” to 6.5”) max.
12 mm (0.5”) to 150 mm (5.8")
LD-100S
Label Dispenser with continuously variable speed control and foot switch. Ideal for production lines and very small or transparent labels.
115-mm (4.5”) max.
Not limited
LD-FLANGES
Optional aluminum Flange Plates suggested for use with narrow labels that may have a tendency to telescope or fall off the core when placed on the Label Dispenser. Also useful if you want to use fan-folded rather than rolled labels. Set of 2 Flanges fits LD-100/T, LD-100S, or LD-200/T.
N/A
N/A
N/A
C-1
Optional Label Counter for LD-100 or LD-200. (Factory installed only)
N/A
N/A
N/A
HS-PS
High-speed power supply to increase speed of the dispenser.
N/A
N/A
N/A



FULL SIZE "CAT" (Constant Adjustable Torque) HEAVY-DUTY LABEL REWINDERS
 

MODEL
ADD SUFFIX
DESCRIPTION AND FEATURES
WIDTH
DIAMETER
SPEED
CAT-2

CHUCK

The industry standard Heavy-duty Label Rewinder with an easy-loading ‘Quick-Chuck’. Ideal for production work. 76 mm (3") standard*.
Up to 170 mm (6,5")
Up to 330 mm (13")
Up to 76 cm/s (30 ips, inches per second)
STANDARD
The ‘Industry Standard’ Heavy-duty Label Rewinder. 76 mm (3") standard*.
Up to 155 mm (6")
Up to 330 mm (13")

1-INCH

CAT-2 for 25 mm (1") diameter cores.
Up to 155 mm (6")
Up to 220 mm (8,6")
10-INCHES
CAT-2 for labels up to 255 mm wide. 76 mm (3") standard*.
Up to 255 mm (10")
Up to 330 mm (13")
ACH
CAT-2 with an Adjustable Core Holder for any core size from 25 to 101 mm in diameter. With inner flange. Use APG-CAT if you wish to also guide the outer edge of your label.
Up to 155 mm (6")
Up to 280 mm (11")
CAT-16
-
Wide Heavy-duty Rewinder/Unwinder for 76mm cores up to 400 mm wide. Same features as CAT-2 Rewinder with extra power.
Up to 400 mm (16")
Up to 300 mm (11,8")
CAT-40
-
Tight rewind up to 400 mm. 76 mm (3") ‘Quick-Chuck’ standard*.
Up to 170 mm (6,5")
Up to 400 mm (16")
LTO
-
Low Torque Option. For tension sensitive printers. Factory installed. (Inkjet).
-
-
-
ADAPT-326
-
Adapter for 76mm CAT-2-CHUCK allows use of 152 mm diameter cores (6”).
-
-
-
APG-CAT
-
Optional Adjustable Paper Guide For CAT-2-ACH or CAT-2-CHUCK. Guides the outer edge of the label web to ensure an even roll edge.
-
-
Installs in minutes

PS CAT-2

-
230V - 50Hz  AC Power Supply for CAT-2 and UCAT-2. Output: 11V – 2.5A Included with Rewinder.
-
-
-
HD-PS
-
230V – 50Hz DC Heavy-Duty Power Supply.
Output: 14V – 4.6A
Recommended when using a Slitter.
-
-
-
VANES
-
Set of 3 vanes (fins). 38, 40, 44, 70 & 76 mm available
-
-
-
ACH-CAT
-
Adjustable Core Holder for any core size from 25 to 100 mm (1" to 4") in diameter. With inner flange.
Up to 155 mm (6")
-
-

 

MODEL
ADD SUFFIX
DESCRIPTION AND FEATURES
WIDTH
DIAMETER
SPEED
CAT-2-TA

CHUCK

The industry standard Heavy-duty Label Rewinder with an easy-loading ‘Quick-Chuck’. Ideal for production work. 76 mm (3") standard*.
Up to 170 mm (6,5")
Up to 220 mm (8.7")
Up to 76 cm/s (30 ips, inches per second)
STANDARD
The ‘Industry Standard’ Heavy-duty Label Rewinder. 76 mm (3") standard*.
Up to 155 mm (6")
Up to 220 mm (8.7")

1-INCH

CAT-2-TA for 25 mm (1") diameter cores.
Up to 155 mm (6")
Up to 220 mm (8,6")
10-INCHES
CAT-2-TA for labels up to 255 mm wide. 76 mm (3") standard*.
Up to 255 mm (10")
Up to 220 mm (8.7")
ACH
CAT-2-TA with an Adjustable Core Holder for any core size from 25 to 101 mm in diameter. With inner flange. Use APG-CAT if you wish to also guide the outer edge of your label.
Up to 155 mm (6")
Up to 220 mm (8.7")
CAT-33-TA
-
Tight rewind up to 330 mm. 76 mm (3") ‘Quick-Chuck’ standard*.
Up to 170 mm (6,5")
Up to 330 mm (13")
ADAPT-326
-
Adapter for 76mm CAT-2-TA-CHUCK allows use of 152 mm diameter cores (6”).
-
-
-
APG-CAT
-
Optional Adjustable Paper Guide For CAT-2-TA-ACH or CAT-2-TA-CHUCK. Guides the outer edge of the label web to ensure an even roll edge.
-
-
Installs in minutes
HD-PS
-
230V – 50Hz DC Heavy-Duty Power Supply.
Output: 14V – 4.6A
Recommended when using a Slitter.
-
-
-
VANES
-
Set of 3 vanes (fins). 38, 40, 44, 70 & 76 mm available
-
-
-
ACH-CAT-S
-
Adjustable Core Holder for any core size from 25 to 100 mm (1" to 4") in diameter. With inner flange.
Up to 155 mm (6")
Up to 220 mm (8.7")
-

* Standard, CHUCK and 10-Inches Models are also available with a 38 mm, 40 mm, 44mm, 70 mm or 100 mm diameter “Quick-Chuck”™ at the same price. Specify when ordering.

LOW-COST LABEL REWINDERS / UNWINDERS: "MINI-CAT"

 

MODEL
DESCRIPTION
LABEL WIDTH
ROLL DIAMETER
SPEED
MC-10
Quality, low-cost Rewinder & Unwinder, coreless or 76mm standard. 38, 40, 44 or 70mm core rewinding on request. Bi-directional with multiple rewind / unwind force settings.
125 mm
220 mm
250 mm/sec.

2nd FLANGE MC-10

Optional Outer Flange for MINI-CAT-10 only.
-
220 mm
-
APG-MC
Adjustable Paper Guide for MINI-CAT-10 or MC-11. Guides outer edge of label to ensure an even roll edge.
Same as Rewinder Model.
-
-
MC-11
Same as MINI-CAT-10 but with continuously Adjustable Core Holder for 25 to 100mm diameter cores.
115 mm
220 mm
250 mm/sec.



DUAL SPINDLE UNWIND / REWIND STATIONS: "TWIN-CAT-2"


 

TWIN-CAT-2

ADD TWO CORE HOLDERS
FROM LIST
(MIX OR MATCH)

CORE DIAMETER
WIDTH
NUMBER OF FLANGES
1-INCH
25,4 mm (1")
155 mm
1
STANDARD
Specify 38, 40, 44, 70 or 76 mm
155 mm
2
STANDARD 10-INCH
Specify 38, 40, 44, 70 or 76 mm
255 mm
2
ACH-CAT-S (No Mix*)
25 to 101 mm
155 mm
1
CHUCK – C-xx*170
*Specify 38, 40, 44, 70 or 76 mm
170 mm
1
CHUCK – C-76200
76 mm
200 mm
1
CHUCK – C-76270
76 mm
270 mm
1
CHUCK – C-100170
100 mm
170 mm
1
CHUCK – C-100200
100 mm
200 mm
1
CHUCK – C-100270
100 mm
270 mm
1
* The ACH-CAT-S core holders can not be mixed with another type.

 
MODEL
DESCRIPTION
WIDTH
INSP-1
Inspection Fixture mounts in minutes on the side of your TWIN-CAT-2. Includes two rollers that your labels glide over as they are presented for inspection. Bi-directional, variable speed operation allows control over winding tightness as well. Can be started and stopped with the optional Foot Switch listed below.
Up to 155 mm
INSP-1 + PC-1
Optional Preset Counter conveniently pre-mounted on the INSP-1 Inspection Fixture ready to plug in and use. Adjustable counter sensitivity.
-
FOOT SWITCH
Foot Switch to start and stop the TWIN-CAT-2, CAT-2, or CAT-16 Rewinder.
-


FULL SIZE HEAVY-DUTY LABEL UNWINDERS: "UCAT"
 

MODEL
ADD SUFFIX
DESCRIPTION
WIDTH
DIAMETER
SPEED
UCAT-S
(NONE)
Economy Label Unwinder. Fixed brake. For 76 mm (3”) cores.
Up to 155 mm (6”)
Up to 330 mm (13”)
Same as printer speed
UCAT-1
- 1-INCH
UCAT-1 for 25 mm (1”) diameter cores.
Up to 155 mm (6”)
Up to 220 mm (8,6")
- CHUCK
UCAT-1 with 76 mm (3”) diameter “Quick-Chuck”*
Up to 170 mm (6.5”)
Up to 330 mm (13”)
-10-INCHES
UCAT-1 for labels up to 255 mm (10)” wide. 76 mm (3”) core.
Up to 255 mm (10”)
Up to 330 mm (13”)
-ACH
UCAT-1 with Adjustable Core Holder for core size 25 mm to 101 mm (1” to 4”)
Up to 155 mm (6”)
Up to 280 mm (11”)
UCAT-2
Standard
Heavy-duty Powered Unwinder for label rolls with 76 mm (3”) cores. Continuously adjustable feed rate. Control arm tracks label unwind usage and starts & stops automatically. Also rewinds.
Up to 155 mm (6”)
Up to 300 mm (12”)
-1-INCH
UCAT-2 for 25 mm (1") cores.
Up to 155 mm (6”)
Up to 220 mm (8,6")
- ACH
UCAT-2 Powered Unwinder with Adjustable Core Holder for any core size from 25 mm to 101 mm (1” to 4”) in diameter.
Up to 155 mm (6”)
Up to 300 mm (12”)
- CHUCK
UCAT-2 with 76 mm (3”) diameter “Quick-Chuck”*
Up to 170 mm (6.5”)
- 10-INCHES
UCAT-2 for labels up to 255 mm (10)” wide. 76 mm (3”) core.
Up to 255 mm (10")

UCAT-40

The Ultimate Unwinder
(NONE)
Heavy-duty 400 mm (16”) Powered Unwinder with 76 mm (3”) diameter “Quick-Chuck”™. Continuously adjustable feed rate. Control arm tracks label usage and starts & stops automatically. Also rewinds. *
Up to170 mm (6.5”)
Up to 400 mm (16”)

 


* Standard, S, CHUCK and 10-Inches Models are also available with a 38 mm, 40 mm, 44mm, 70 mm or 100 mm diameter “Quick-Chuck”™ at the same price. Specify when ordering.
 


HEAVY-DUTY LABEL SLITTERS & SLITTING STATIONS
 

MODEL

DESCRIPTION
INCLUDES ALL YOU NEED EXCEPT LABELS & CORES

LABEL WIDTH
(mm)

SPEED
(mm/sec)

S-100
Heavy-Duty Label Slitter. Requires a CAT-2-CHUCK or TWIN-CAT-2.
170
760
S-200
Wide Heavy-Duty Label Slitter. Requires a CAT-2-CHUCK 10" Rewinder.
275
760
BH-1
Additional Blade Holder Assembly.
Includes Precision High-Speed Blade
-
-
HSB-10
10 Precision High-Speed Blades for Slitters
-
-
PC-1
Preset counter counts label batch size. Stops Rewinder automatically when job is finished. (factory installed)
Any
Same as Printer
Link
Adjustable Locking Bar to lock units together in position (Rewinder, Slitter & Unwinder).
-
-
S-100S
  • UCAT-S Economy Heavy-Duty Label Unwinder with fixed brake;
     
  • S-100 Heavy-Duty Label Slitter;
     
  • 2 Blade Holders with Blades;
     
  • CAT-2-CHUCK Heavy-Duty Rewinder; 76mm diameter ‘Quick-Chuck’ is Standard; specify if 38, 40, 44 or 70mm diameter is desired instead.
     
  • 1 Aluminium and 2 Thin Plastic Separator Plates;
     
  • ‘LINK’: Adjustable Locking Bar to lock units together in position,
     
  • Heavy-Duty Power Supply
     
170
760
S-200S
  • UCAT-1-10” Heavy-Duty Label Unwinder;
     
  • S-200 Heavy-Duty Label Slitter;
     
  • 3 Blade Holders with blades;
     
  • CAT-2-CHUCK-10” Heavy-Duty Rewinder;
     
  • 1 Aluminium and 3 Thin Plastic Separator Plates;
     
  • 'LINK’: Adjustable Locking Bar to lock units together in position;
     
  • Heavy-Duty Power Supply.
     
255
760
S-100ST
  • UCAT-S Economy Heavy-Duty Label Unwinder with fixed brake;
     
  • S-100 Heavy-Duty Label Slitter;
     
  • 2 Blade Holders with Blades;
     
  • TWIN-CAT-2 Heavy-Duty Rewinder; 76mm diameter ‘Quick-Chucks’ are Standard; specify if 38, 40, 44 or 70mm diameter is desired instead.
     
  • ‘LINK’: Adjustable Locking Bar to lock units together in position,
     
  • Heavy-Duty Power Supply.
     
170
760
S-200ST
  • UCAT-1-10” Heavy-Duty Label Unwinder;
     
  • S-200 Heavy-Duty Label Slitter;
     
  • 3 Blade Holders with blades;
     
  • TWIN-CAT-2 Heavy-Duty Rewinder with 2 Quick-Chucks 10”;
     
  • ‘LINK’: Adjustable Locking Bar to lock units together in position;
     
  • Heavy-Duty Power Supply.
     
255
760


HEAVY-DUTY LABEL COUNTERS AND COMPLETE COUNTING STATIONS


 
MODEL

DESCRIPTION

WEB WIDTH

NOTES

C-100
 
PC-1  Preset Counter mounted on chassis with guides to position label web through sensor gap. Adjustable counter sensitivity. Counts single / multi-across labels or preset batch size. Can stop rewinder (CAT-2) automatically when job is finished.
170 mm
Requires a CAT-2 Rewinder to pull your labels through the Counter. Can also be used with a Label Unwinder to form a complete off-line label counting and manual inspection station. No slitting function is included.
C-200
Same as C-100 with wider width capacity
255 mm



HEAVY-DUTY QUICK-LOCKING CORE CHUCKS: "QUICK-CHUCKS"™


 
MODEL
DIAMETER
WIDTH
ROLL WEIGHT
C-38170
38 mm (1.5”)
170 mm(6.5”)

Maximum
14 Kg (31-lbs.)

C-40170
40 mm
C-44170
44 mm
C-70170
70 mm
C-76170
76 mm (3”)
C-76200
76 mm (3”)
200 mm (7.8”)
C-76260
76 mm (3”)
260 mm (7.8”)
C-100170
100 mm (4”)
170 mm (7.8”)
C-100200
100 mm (4”)
200 mm (7.8”)
C-100260
100 mm (4”)
260 mm (7.8”)

 

LABEL SEPARATOR PLATES

These Plates keep slit label rolls from interleaving or telescoping. Aluminum Separator Plates are recommended for the inner and outer Plates, Thin Plastic for the Plates in-between slit rolls. Typical order: 2 SP Aluminum Separator Plates + Plastic Plates equal to the number of cutting Blades being used.

MODEL
ADD SUFFIX (MM)
DESCRIPTION
AVAILABLE

SP

25-220
220mm Diameter for 25mm Cores
Aluminium & Plastic
38-220
220mm Diameter for 38mm Cores
Aluminium & Plastic
40-220
220mm Diameter for 40mm Cores
Aluminium & Plastic
40-300
300mm Diameter for 40mm Cores
Aluminium
44-220
220mm Diameter for 44mm Cores
Aluminium & Plastic
70-220
220mm Diameter for 70mm Cores
Aluminium & Plastic
76-220
220mm Diameter for 76mm Cores
Aluminium & Plastic
76-300
300mm Diameter for 76mm Cores
Aluminium
76-400
400mm Diameter for 76mm Cores
Aluminium
ACH-220
220mm Diameter for Adjustable Cores
Aluminium & Plastic
ACH-300
300mm Diameter for Adjustable Core
Aluminium